⧉ All Products ICAM V27 User Interface

Table of Contents:

  • ICAM Configuration Panel
    • Overview
    • General
    • QUEST
    • GENER
    • CAM Interfaces
    • Tape & DNC
    • Output
    • Environment
    • All Entries
  • Launch Panel (GENER/CERUN)
    • Launch Panel
      • Center tab selections
      • Processing
      • Interface
      • Merged PSE Processing
      • DEF file
      • OK, Cancel and other buttons
    • JOB Button
      • Job Files
      • Review Files
    • DB Manager / AUTOPOST Button
      • Database Manager
      • AUTOPOST (requires "xqs" license)
    • GENER Settings
      • CL File
      • Database
      • Post processor and Revision (Rev)
      • Program ID
      • User Parameters
      • Options and CAM buttons
    • GENER CAM Dialog
      • CAM System
      • Settings
      • OK, Cancel and Reset buttons
    • GENER Options
      • Tape file
      • Listing file
      • Plot file
      • Log file
      • Trace in Listing
      • Also include information about…
      • OK, Cancel and Reset buttons
    • Optimizer/Force Options
      • Use Vericut Optimizer/Force on CL File
      • Project File
      • Optimized CL File
      • User Interface
      • Optimizer/Force launch button
    • CERUN Settings
      • Options
    • CERUN Options
    • Virtual Machine Settings
    • Preferences Settings
      • Enable launch panel tooltip help
      • Use common browse directory
      • Detect new/updated files on launch
      • Save for review
  • QUEST Developer
    • Welcome
    • QUEST Overview
      • GENER Overview
      • Control Emulator Overview
      • Virtual Machine Overview
    • Users Guide
      • Shortcuts
      • Main interface
      • Navigator
        • Database Navigator
        • Post Processor Navigator
        • Control Emulator Navigator
      • Console View
        • Help
        • Build
        • Consistency
        • Finder
        • Diffs
      • Workspace
      • Database View
      • Comment View
      • Questionnaire View
      • Graphical Questionnaire View
      • Register View
      • RMD View
      • Tape Editor View
      • Dialog View
      • Dialog Editor View
      • Macro View
        • User Defined Syntax macros
        • User Function macros
      • Macro Editor View
        • Editing Features/Functions
        • Right-Mouse Context Menu Functions
        • Section Controls
      • File Storage (Windows only)
      • Code Customization View (Control Emulator only)
      • Data Customization View (Control Emulator only)
      • Event Macro View (Control Emulator only)
      • Code Macro View (Control Emulator only)
      • Data Macro View (Control Emulator only)
      • Code Table View
    • Menu Bar
      • File
      • Edit
      • Database
      • View
      • Dialog
      • Tools
      • Help
    • Dialogs
      • About...
      • By Type
      • Calculator
      • Character Set
      • Test Result
      • Test
      • GENER Test
      • CERUN Test
      • Code Properties Dialog (Control Emulator only)
      • Copy
      • Data Properties Dialog (Control Emulator only)
      • Auto Refresh
      • Diffs
      • Dialog Control Properties
      • Dump Macros
      • Expression Evaluator
      • Finder
      • Generate
      • Generate As
      • G/M Code Question Panel (Graphical Questions & Wizard)
      • Answer Type:
      • Initialize Registers
      • Load
      • New CODE Macro (Control Emulator only)
      • New DATA Macro (Control Emulator only)
      • New Macro
      • Open
      • Add/Remove Password
      • QUEST Preferences
      • Preferences: Macro Editor
      • Preferences: General
      • Progress
      • Properties
      • Purge
      • Register
      • Rename
      • There are two ways of changing a post processor’s name.
      • Replace Macro
      • Replacement String
      • RMD Prompt
      • Save/Generate
      • Save As
      • Select Configuration
      • Select User
      • Spindle Table
      • Spindle Table
      • Startup Environment
      • Tip of the Day
      • Toolbars
      • Unlock database
      • Words Manager
      • Words Manager
  • Virtual Machine
    • Overview
    • Virtual Machine Dialogs
      • The Chip and Split Dialog
      • The Collision Dialog
      • The Compare Dialog
      • The Cube Property Dialog
      • The Curve Axis Property Dialog
      • The Cylinder/Cone Property Dialog
      • The Display Dialog
      • The Extruded Property Dialog
      • The Grid Dialog
      • The Group Dialog
        • Collision Groups
        • Collision Exclusion Groups
        • Selection Groups
      • The Head Axis Property Dialog
      • The Light Dialog
      • The Linear Axis Property Dialog
      • The Material Dialog
      • The Mesh Property Dialog
      • The Options Dialog
      • The Picture Property Dialog
      • The Reference Axis Property Dialog
      • The Revolved Property Dialog
      • The Rotary Axis Property Dialog
      • The Parts/Fixtures Dialog
      • The Sphere Property Dialog
      • The Statistics Dialog
      • The Stock Axis Property Dialog
      • The Tools/Holders/Heads Dialog
      • Tools
        • Lathe Tool Type
        • Mill Tool Type
        • Probe Tool Type
        • Additive Tool Type
      • Holders
        • Profile Holder Type
        • Generic Holder Type
      • Heads
      • The Tool Axis Property Dialog
    • Virtual Machine Specific Menus
      • Simulation Menu
      • Simulation»Camera»Attach
      • Simulation»Camera»Center (Ctrl+Shift+Space)
      • Simulation»Camera»Fit (Ctrl+Space)
      • Simulation»Camera
      • Simulation»Camera»Perspective
      • Simulation»Camera»Pivot (Ctrl+P) (Ctrl+Shift+P)
      • Simulation»Camera»Reset
      • Simulation»Camera»Front
      • Simulation»Camera»Speed Increase (Ctrl+'+')
      • Simulation»Camera»View Angle Increase (Shift+'+')
      • Simulation»Chip and Split (Ctrl+Alt+C)
      • Simulation»Compare... (Ctrl+Alt+Q)
      • Simulation»Controller
      • Simulation»Construct Axis»Curve Axis
      • Simulation»Construct Axis»Head Axis
      • Simulation»Construct Axis»Linear Axis
      • Simulation»Construct Axis»Reference Axis
      • Simulation»Construct Axis»Rotary Axis
      • Simulation»Construct Axis»Stock Axis
      • Simulation»Construct Axis»Tool Axis
      • Simulation Menu
      • Simulation»Construct Entity»Cube
      • Simulation»Construct Entity»Extruded
      • Simulation»Construct Entity»Mesh
      • Simulation»Construct Entity»Picture
      • Simulation»Construct Entity»Revolved
      • Simulation»Construct Entity»Sphere
      • Simulation»Display (Ctrl+Alt+D)
      • Simulation»Grid (Ctrl+Alt+G)
      • Simulation»Group Selection
      • Simulation»Hide Selection (Ctrl+B) (QUEST)
      • Simulation»Selection»Hide in View (Ctrl+B) (CERUN and GENER)
      • Simulation»Selection»Hide in All Views (CERUN and GENER only)
      • Simulation»Invert Hide State
      • Simulation»Lights (Ctrl+Alt+L)
      • Simulation»Manager
      • Simulation»Materials (Ctrl+Alt+M)
      • Simulation»Measure
      • Simulation»Mode»Camera
      • Simulation»Mode»Measurement
      • Simulation»Mode»Pause Gouge Detection
      • Simulation»Mode»Pause Material Removal
      • Mode»Selection
      • Simulation»Open Setup
      • Simulation»Options (Ctrl+Alt+O)
      • Simulation»Save Setup
      • Simulation»Show»Axes Marker
      • Simulation»Cross Section
      • Simulation»Show
      • Simulation»Filters
      • Simulation»Show»Kinematics
      • Simulation»Show»Plane Grid
      • Simulation»Show»Safety Zones
      • Simulation»Show»Tool Path as Overlay (Ctrl+Shift+T)
      • Simulation»Show»Tool Path (Ctrl+T)
      • Simulation»Show»Tool Reference
      • Simulation»Show»Tool Vector
      • Simulation»Show»Wireframe
      • Simulation»Show»Workpiece Coords (Ctrl+W)
      • Simulation»Show»Workpiece Reference
      • Simulation»Show All/Rehide (Ctrl+Alt+B) (QUEST)
      • Simulation»Selection»Show All/Rehide (Ctrl+Alt+B) (CERUN and GENER)
      • Simulation»Selection»Show All/Rehide in All Views (CERUN and GENER only)
      • Simulation»Statistics (Ctrl+Alt+O)
      • Simulation»Parts/Fixtures... (Ctrl+Alt+P)
      • Simulation»Tools/Holders/Heads (Ctrl+Alt+T)
      • Simulation»Use World CS
      • Simulation»Virtual Machine
      • Simulation Menu
      • QUEST Simulation menu
      • GENER/CERUN Simulation menu
    • Simulation Toolbars
      • VM Animation Toolbar
      • VM Annotation Toolbar
      • VM Construct Toolbar
      • VM Cross Section Toolbar
      • VM Grid Toolbar
      • VM Measure Toolbar
      • VM Mode Toolbar
      • View Toolbar
      • VM View Filter Toolbar
      • VM View Toolbar
    • Simulation Windows
      • VM Controller
      • VM Controller / Axes Tab
      • VM Controller / Fixture Compensation Tab
      • VM Controller / Time Line Tab
      • VM Controller / Tool Compensation Tab
      • Simulation Manager
      • Virtual Machine
    • Virtual Machine
      • Virtual Machine
        • Adding Parts, Fixtures and Stock to the Simulation
          • Differences between Part, Stock and Fixture Components
      • Virtual Machine Tooling
        • Adding Tooling Definitions to the Simulation
      • Virtual Machine Lighting
        • Adjusting the lighting
      • Virtual Machine Camera Manipulation
        • Navigating the Simulation Window
          • Camera Panning:
          • Camera Rotation:
          • Camera Roll:
          • Camera origin and attachment:
          • Camera viewpoint:
          • To summarize:
      • Virtual Machine
        • Simulation Input Controls
          • Standard Keyboard Mapping
          • Construction Keyboard Mapping
          • Mouse Mapping
          • Time Line Keyboard Mapping
      • Virtual Machine's Results
        • Monitoring Virtual Machine's Results
          • Animation Control
          • Head-Up Display
          • Tool Path Display
          • VM Controller Time-Line
          • Part vs. Stock Comparison
      • Virtual Machine Fixture Compensation
        • Setting Fixture Compensation
      • Virtual Machine Tool Compensation
        • Setting Tool Compensation
          • Length Compensation
          • Diameter Compensation
  • GENER User Interface
    • Welcome to GENER Help
    • CAM-POST GENER Interface
      • Dialogs
        • About
        • Find
        • Goto…
        • Preferences...
          • General tab
          • Debug tab
          • Trace tab
        • Progress Window
        • Seek
        • Toolbars
      • Menus
        • Debug
          • Debug»Breakpoint Manager
          • Debug»Enable/Disable Breakpoint (Ctrl+F9)
          • Debug»Jump to Cursor (Ctrl+Shift+F10)
          • Debug»Kinematics status
          • Debug»Source
          • Debug»Macro Manager
          • Debug»Remove All Breakpoints (Ctrl+Shift+F9)
          • Debug»Run to Cursor (Ctrl+F10)
          • Debug»Set/Clear Breakpoint (F9)
          • Debug»Stack
          • Debug»Step Into (F11)
          • Debug»Step Out (Shift+F11)
          • Debug»Step Over (F10)
          • Debug»Variables
        • File
          • File»New Job (Ctrl+N)
          • File»Save For Review
          • File»View Listing File
          • File»View Tape File
          • File»Exit (Alt+F4)
        • Help
          • Help Online
          • Help»Package Job
          • Getting Product Support
            • Before Calling...
            • To contact Icam support...
              • Headquarters
          • Help Topics
        • Run
          • Run»Details
          • Run»Fast (F8)
          • Run»Pause (F6)
          • Run»Play (F5)
          • Run»Restart (Shift+F5)
          • Run»Step (F7)
        • Tools
          • Tools»Configuration...
          • Tools»Preferences...
          • Tools»Find
          • Tools»Toolbar...
        • View
          • View»Input
          • View»Output
          • View»Macro
          • View»Console
          • View»Diagnostic
          • View
          • View»Previous axes page
          • View»Status bar
        • Windows
          • Window»Load Layout
          • Window»Save Layout
          • Window»Style
          • Window»Default Layout
      • Toolbars
        • Debug
        • Job
        • Layout
        • Run
        • View
      • Windows
        • Breakpoint Manager
          • The breakpoint list
          • Toolbar buttons
          • Enabling, disabling and editing
          • Breakpoint types
            • Post-processor (GENER) mode
            • Control Emulator (CERUN) mode
            • Source-line breakpoints
          • Persistence
        • Console Trace
        • Diagnostic
        • Input Trace
        • Kinematics status
        • Source
        • Macro Manager
          • The macro list
          • Enable / Disable button
          • Show / Hide button
        • Macro Trace
        • Output Trace
        • Stack
        • Variable
      • Synchronize
  • CERUN User Interface
    • Control Emulator
    • Control Emulator Pre-Processors
      • ABB Robot Pre-Processor
        • ABB Robot Pre-Processor Syntax
      • Fanuc Pre-Processor
        • Fanuc Pre-Processor Syntax
          • 1. Pre-processor setup
          • 2. Command Abbreviations
          • 3. Operators
          • 4. Arithmetic operators
          • 5. Unconditional branching
          • 6. Conditional branching
          • 7. Repetition
          • 8. Variables
          • 9. Sub-program related
          • 10. Other matching patterns
      • Heidenhain Pre-Processor
        • 1. Pre-processor setup
        • 2. Supported Syntax
        • 3. Selecting a default startup syntax
        • 4. Changing syntax during processing
        • 5. What are the configurable options?
          • Heidenhain Conversational Pre-Processor Syntax
            • 1. “FN” Functions
            • 2. Supported arithmetic operators & functions
            • 3. String variable declaration
            • 4. String functions
            • 5. Variables / Parameters
            • 6. Program / Label / Sub-program
          • Heidenhain ISO Pre-Processor Syntax
            • 1. “D” Functions
            • 2. Supported arithmetic operators & functions
            • 3. String variable declaration
            • 4. String functions
            • 5. Variables / Parameters
            • 6. Program / Label / Sub-program
      • Mazak EIA/ISO Pre-Processor
        • Mazak EIA/ISO Pre-Processor Syntax
          • 1. Pre-processor setup
          • 2. Command Abbreviations
          • 3. Operators
          • 4. Arithmetic operators
          • 5. Unconditional branching
          • 6. Conditional branching
          • 7. Repetition
          • 8. Variables
          • 9. Sub-program related
          • 10. Other matching patterns
      • Okuma Pre-Processor
        • Okuma Pre-Processor Syntax
          • 1. Pre-processor setup
          • 2. Operators
          • 3. Arithmetic operators
          • 4. Unconditional branching
          • 5. Conditional branching
          • 6. Variables
          • 7. Sub-program related
          • 8. Other matching patterns
      • Fanuc Pre-Processor
        • OSAI 10 Series Pre-Processor Syntax
          • 1. Pre-processor setup
          • 2. Register default value
          • 3. Operators
          • 4. Arithmetic operators
          • 5. Unconditional branching
          • 6. Conditional branching
          • 7. Repetition
          • 8. Variables
          • 9. Sub-program related
          • 10. Other matching patterns
      • Siemens Pre-Processor
        • Siemens Pre-Processor Syntax
          • 1. Pre-processor setup
          • 2. Supported operators
          • 3. Supported arithmetic operators & functions
          • 4. Unconditional branching
          • 5. Conditional branching
          • 6. Repetition
          • 7. Variables
          • 8. Sub-program related
          • 9. Other matching patterns
          • 10. Misc Functions
          • 11. System Variables
          • 12. Frame Support
      • Control Emulator Pre-Processors
        • Z32 Syntax
    • CERUN Interface
      • Dialogs
        • About
        • CERUN Option
        • Find
        • Goto…
        • Preferences...
          • General tab
          • Debug tab
          • Trace tab
        • Progress Window
        • Seek
        • Toolbars
      • Menus
        • Debug
          • Debug»Breakpoint Manager
          • Debug»Enable/Disable Breakpoint (Ctrl+F9)
          • Debug»Jump to Cursor (Ctrl+Shift+F10)
          • Debug»Source
          • Debug»Macro Manager
          • Debug»Remove All Breakpoints (Ctrl+Shift+F9)
          • Debug»Run to Cursor (Ctrl+F10)
          • Debug»Set/Clear Breakpoint (F9)
          • Debug»Stack
          • Debug»Step Into (F11)
          • Debug»Step Out (Shift+F11)
          • Debug»Step Over (F10)
          • Debug»Variables
        • File
          • File»New Job (Ctrl+N)
          • File»Save For Review
          • File»View Listing File
          • File»Exit (Alt+F4)
        • Help
          • Help Online
          • Help»Package Job
          • Getting Product Support
            • Before Calling...
            • To contact Icam support...
              • Headquarters
          • Help Topics
        • CERUN
          • CERUN»Code Groups
          • CERUN»MDI
          • CERUN»Opskip
          • CERUN»Option
        • Run
          • Run»Fast (F8)
          • Run»Pause (F6)
          • Run»Play (F5)
          • Run»Restart (Shift+F5)
          • Run»Step (F7)
        • Tools
          • Tools»Configuration...
          • Tools»Preferences...
          • Tools»Find
          • Tools»Toolbar...
        • View
          • View»Input
          • View»Output
          • View»Macro
          • View»Console
          • View»Diagnostic
          • View»Increase Margin
          • View»Previous axes page
          • View»Status bar
        • Windows
          • Window»Load Layout
          • Window»Save Layout
          • Window»Style
          • Window»Default Layout
      • Toolbars
        • Debug
        • Job
        • Layout
        • Run
        • View
      • Windows
        • Breakpoint Manager
          • The breakpoint list
          • Toolbar buttons
          • Enabling, disabling and editing
          • Breakpoint types
            • Post-processor (GENER) mode
            • Control Emulator (CERUN) mode
            • Source-line breakpoints
          • Persistence
        • Controller » Opskip tab
        • Controller » MDI tab
        • Controller » Code Groups tab
        • Console Trace
        • Diagnostic
        • Input Trace
        • Source
        • Macro Manager
          • The macro list
          • Enable / Disable button
          • Show / Hide button
        • Macro Trace
        • Output Trace
        • Stack
        • Variable
      • Synchronize
ICAM V27 User Interface
  • ⧉
  • GENER User Interface
  • CAM-POST GENER Interface
  • Menus
  • View

View

View»Input

View»Output

View»Console

View»Macro

View»Diagnostic

View»Increase X Margin

View»Decrease X Margin

View»Previous axes page

View»Next axes page

View»Status bar

Previous Next

© Copyright 2026, CGTech.