⧉ All Products Icam Post V27

Table of Contents

  • Copyright
  • Using this manual
  • Icam Post: General Information
    • About Icam Post
      • Types of Machines Supported
    • About Post-Processing
    • About QUEST and GENER
    • About the Icam Portal
  • QUEST: Post-Processor Development
    • QUEST
      • Starting QUEST
        • Starting QUEST from the Desktop
        • Starting QUEST from a Command Prompt
        • Pre-Compiling Macros for GENER
        • Importing Post-Processors
        • Creating a Database Listing
      • QUEST Inputs and Outputs
        • The Icam Database
        • Exported/Imported Post-Processor
        • Dedicated Post-Processors
        • Basic Post-Processors
        • The QUEST Listing
          • HTML Listing Format
          • Standard Listing Format
      • Using QUEST
        • The QUEST Interface
        • Creating a New Post-Processor
        • Questionnaire Defaults
        • Questionnaire Chapters and Sections
        • Saving and Generating your work
        • Testing your Post-Processor
        • Modifying an Existing Post-Processor
        • Wrapping Up
      • The Icam Database
        • Post-Processor File Name Conventions
        • The Database Navigator
          • Databases
          • Post-Processors
      • Post-Processor Customization
        • Startup/Shutdown Procedures
          • Startup/Shutdown Macro Types
            • Declaration Macro
            • Machine Startup/Shutdown Macros
            • Break Startup/Shutdown Macros
            • Tool Change Startup/Shutdown Macros
            • First Tool Change Startup/Shutdown Macros
            • CYCLE Startup/Shutdown Macros
            • Motion Startup/Shutdown Macros
            • LCS Startup/Shutdown Macros
            • Operation Event Macro
            • Register Macro
            • Tape Macro
            • Diagnostic Macro
          • The RMD Facility
        • Tape Editor
        • The Dialog Editor
          • The Dialog Template Editor
        • User Defined Syntax Macros
          • Adding Macros
          • Loading and Exporting macros
          • Macro Editor
          • Compiling and Saving Macros
          • Ordering Macros
          • Modifying and Deleting Macros
        • User Function Macros
          • Create User Function Macro
          • The User Function Macro Editor
          • Delete or Disable User Function Macros
          • Export User Function Macros
        • File Storage
    • Post-Processor Macros
      • The Macro Language
        • Fundamentals of the Macro Language
          • Basic Macro Syntax
          • Macro Data Types
          • Macro Variables
          • Explicit Type Declaration (DECLAR)
            • Variable Scope
            • Variable Type
            • Variable Name
            • Variable Array
            • Variable Assignment
            • Variable Default
          • Operators
            • Numeric, String and Sequence Operators
            • Assignment Operators
            • Logical Operators
          • Detecting Data Type Mismatching
        • Function Calls
          • Built-in Functions
          • External Functions
          • User Function Macros
            • Function Declaration
            • Function Definition
            • Function Name
            • Function Parameters
            • Function Body
        • Flow Control in a Macro
          • The IF Block
          • The CASE Statement
          • The WHILE Loop
          • The REPEAT Loop
          • The DO Loop
          • Exiting Loops (EXIT)
          • Unconditional Jumps (JUMPTO)
          • Exiting a Macro (TERMAC)
          • Ending a Macro (ENDMAC)
        • Macro Invocation
          • Enable/Disable Macro Matching (MATCH)
          • Outputting the Identifier or Event (OUTPUT)
          • Invoking Startup/Shutdown Procedures
            • Declaration Macro
            • Machine Startup/Shutdown Macros
            • Break Startup/Shutdown Macros
            • First Tool Change Startup/Shutdown Macros
            • Tool Change Startup/Shutdown Macros
            • Cycle Startup/Shutdown Macros
            • Motion Startup/Shutdown Macros
            • LCS Startup/Shutdown Macros
            • Operation Event Macro
            • Register Macro
            • Tape Macro
            • Diagnostic Macro
          • Invoking User Defined Macros
            • SDL Class:Subclass
            • SDL Arguments
            • Required SDL Arguments
            • Optional SDL Arguments
            • The * SDL Argument
        • Generating CL Records in a Macro
          • Post-Processor Commands in a Macro
          • Suppressing Post-Processor Commands
          • Outputting the Matched Record (OUTPUT)
          • Generating Other CL Record Types
          • Motion CL Records
          • Environment Control CL Records
        • CL File I/O from a Macro
          • Repositioning the CL File (SEARCH)
          • Reading a CL Record (TAPERD)
          • Functions to Examine the Last CL Record
          • Modifying the Last CL Record (CLPUT)
          • Processing the Last CL Record (TAPEWT)
          • Deleting CL File Records (TAPEOP)
          • CL File Processing Examples
        • Text File I/O from a Macro
          • Opening a Text File (OPEN)
          • Closing a Text File (CLOSE)
          • Writing to a Text File (WRITE)
          • Reading from a Text File (READ)
          • Reading from a String Value (READ)
        • Other Macro Commands
          • Outputting Error Messages (ERROR)
          • Calling other programs (SYSTEM)
      • The PPFUN Command
        • 1 Set Error Message Minimum Severity
        • 2 Set Tape Punching Minimum Severity
        • 3 Creating Custom Error Messages
        • 4 Modifying Time Summaries
        • 7 Assigning Values to Registers
        • 8 Modify Registers
        • 9 Replace or Disable G and M Codes
        • 10 Disable Block Purging
        • 11 Force Block Purging
        • 12 Linear and Rotary Axes Frequency
        • 14 Outputting Standard Error Messages
        • 15 Modifying Error Messages
        • 16 Ordering Multiple G and M Codes
        • 17 String Formatting
        • 18 G and M Code Substitution
        • 19 G and M Code Block Purge
        • 20 Enabling Radial Distance Registers
        • 21 Macro I/O Error Handling
        • 22 Tape File Functions
          • Tape File Wrap-up
          • Tape File Production Status
          • Multiple Tape Files
        • 23 Reset Travel and Timing Data
          • General recording of Travel and Timing
          • Recording of Tool Travel and Timing
          • Recording of Operation Travel and Timing
        • 24 Set High Feed Threshold
        • 25 Load Tool and Head Tables
      • Macro Look-Ahead Processing
        • Standard Look-Ahead Searches
        • Look-Ahead Variables
        • Variable Look-Ahead Mechanism
        • Limitations of Look-Ahead Processing
        • Testing for Look-Ahead Mode
        • Forcing a Particular Look-Ahead Result
        • $FLOOK Generic Look-ahead
          • Ending a Look-ahead using the $LOOK Macro System Variable
          • Effect of Duplicate and Nested $FLOOK Functions
          • Effect of FINI on $FLOOK
          • Examples
        • $FINFO Operation Look-ahead
          • Operation status at start of cut
          • Operation processing conditions
          • Operation key motion data
          • Operation user-defined variables
          • Ending a $FINFO look-ahead
        • Operation Event Look-ahead
          • Operation status at start of cut
          • Operation key motion data
          • Operation event macro processing
          • Ending an operation event look-ahead
      • String Formatting
        • Output String Format
          • Numeric Output Format
          • Time Output Format
          • String Output Format
          • Minor Word Output Format
          • Major Word Output Format
          • Logical Output Format
          • Tab Output Format
          • Wildcard Output Format
          • Register Index Output Formats
          • Predefined Register Output Format
          • Current Predefined Register Value
          • ASCII Value Output Format
        • Input String Format
          • Space Input Format Character
          • Exclamation Input Format Character
          • Numeric Input Format
          • Time Input Format
          • String Input Format
          • Minor Word Input Format
          • Major Word Input Format
          • Logical Input Format
          • Tab Input Format
          • Skip Character Input Format
          • Wildcard Input Format
    • Macro System Variables
      • Variable Summary
        • Back-plot file variables
        • Canned cycle variables
        • Composite post-processor variables
        • Constants
        • Contouring variables
        • Conversion factor variables
        • Coolant feed rate and spindle variables
        • Cutter compensation variables
        • Error message variables
        • Lathe variables
        • Look-ahead variables
        • Licensed option variables
        • Machine and Workpiece coordinate variables
        • Machining time variables
        • Macro variables
        • MCD/Tape variables
        • Miscellaneous variables
        • Motion related variables
        • Operation variables
        • Post-processor variables
        • Post-processor verification listing variables
        • Subprogram variables
        • Tooling variables
      • Variables Defining Constants
      • Machine, CL & Workpiece Coordinate Variables
      • Motion-Related Variables
      • Macro Variables
      • Look-Ahead Variables
      • Conversion Factor Variables
      • Coolant, Feed Rate and Spindle Variables
      • Cutter Compensation Variables
      • Operation Variables
      • Tooling Variables
      • Lathe Variables
      • Contouring Variables
      • Automated Canned Cycle Variables
        • Drill Cycle Variables
        • Thread Cycle Variables
      • MCD/Tape Variables
      • Backplot File Variables
      • Machining Time Variables
      • Post-Processor Definition Variables
      • Verification Listing Variables
      • Error Message Variables
      • Composite Post-Processor Variables
      • Subprogram Variables
      • Licensed Option Variables
        • Arc and Spline Fitting Variables
        • High Speed Machining Variables
        • SmartPATH Variables
        • SmartCUT Variables
        • SmartFEED Variables
      • Miscellaneous Variables
    • Macro Functions
      • Function Summary
      • Mathematical Functions
      • Numeric Functions
      • Geometric Functions
      • Vector Functions
      • Matrix Functions
      • Conditional Functions
      • Conversion Functions
      • Character and Sequence Functions
      • Command Line Functions
      • File and Directory Functions
      • CL Data Parsing Functions
      • Other Functions
  • GENER: The Post-Processor
    • GENER
      • Starting GENER
        • Starting GENER from an Extractor
        • Starting GENER from the Desktop
        • Starting GENER from a Command Prompt
        • Starting PSE from a Command Prompt
        • GENER Return Codes
        • The Launch Panel
          • GENER Tab
          • VM Tab
          • Preferences Tab
          • Options Dialog
          • CAM Dialog
          • DB Manager
          • JOB Button
      • GENER Inputs and Outputs
        • Input CL File
        • Output NC Program File
        • Output Verification Listing
          • HTML Listing Format
          • Standard Listing Format
          • Identification Page
          • The NC Control Tape Listing
            • Title Block
            • Display Data
          • Summary Data
            • Section Summary
            • Page Summary
            • Tooling Summary
            • Tool Flute Length Summary
            • Tool Travel Summary
            • Machining Time Summary
            • Diagnostic Summary
        • Output Log File
        • Output Review File
        • Output Backplot File
      • Using GENER
        • Diagnostics
        • Tracing
        • Simulation
        • Debugging
        • Menus
          • File Menu
          • Run Menu
          • View Menu
          • Debug Menu
          • Simulation Menu
            • Simulation»Virtual Machine
              • Camera panning
              • Camera rotation
              • Camera roll
              • Camera origin and attachment
              • Camera viewpoint
              • To summarize
            • Simulation»Controller
              • Simulation»Controller: Axes
              • Simulation»Controller: Fixture Compensation
              • Simulation»Controller: Tool Compensation
              • Simulation»Controller: Time Line
              • Simulation»Controller: Code Groups
              • Simulation»Controller: PPFUN
            • Simulation»Manager
            • Simulation»Mode
              • Simulation»Mode»Camera
              • Simulation»Mode»Selection
              • Simulation»Mode»Measurement
              • Simulation»Mode»Pause Material Removal
              • Simulation»Mode»Pause Gouge Detection
            • Simulation»Parts/Fixtures (Ctrl Alt P)
            • Simulation»Tools/Holders/Heads (Ctrl Alt T)
              • Tools
              • Holders
              • Heads
            • Simulation»Camera
              • Simulation»Camera»Fit (Ctrl Space)
              • Simulation»Camera»Center (Ctrl Shift Space)
              • Simulation»Camera»Pivot (Ctrl P) (Ctrl Shift P)
              • Simulation»Camera»Attach
              • Simulation»Camera»Perspective
              • Simulation»Camera»Front
              • Simulation»Camera»Back
              • Simulation»Camera»Top
              • Simulation»Camera»Bottom
              • Simulation»Camera»Left
              • Simulation»Camera»Right
              • Simulation»Camera»Speed (Ctrl +, Ctrl –)
              • Simulation»Camera»View Angle (Shift +, Shift –)
              • Simulation»Camera»Load (Ctrl 0–9)
              • Simulation»Camera»Save (Ctrl Alt 0–9)
              • Simulation»Camera»Reset
            • Simulation»Show
              • Simulation»Show»Wireframe
              • Simulation»Show»Tool Path (Ctrl T)
              • Simulation»Show»Tool Vector
              • Simulation»Show»Tool Path as Overlay (Ctrl Shift T)
              • Simulation»Show»Filters
              • Simulation»Show»Cross Section
              • Simulation»Show»XY Plane Grid
              • Simulation»Show»YZ Plane Grid
              • Simulation»Show»ZX Plane Grid
              • Simulation»Show»Axes Marker
              • Simulation»Show»Kinematics
              • Simulation»Show»Workpiece Reference
              • Simulation»Show»Tool Reference
              • Simulation»Show»Safety Zones
              • Simulation»Show»Workpiece Coords (Ctrl W)
              • Simulation»Show»Display
              • Simulation»Show»Next Display (Ctrl D)
              • Simulation»Show»Previous Display (Ctrl Shift D)
            • Simulation»Measure
            • Simulation»Annotation
            • Simulation»Selection
              • Simulation»Selection»Hide in View (Ctrl B)
              • Simulation»Selection»Hide in All Views
              • Simulation»Selection»Show All/Rehide (Ctrl Alt B)
              • Simulation»Selection»Show All/Rehide in All Views
              • Simulation»Selection»Invert Hide State (Ctrl Shift B)
            • Simulation»Grid (Ctrl Alt G)
            • Simulation»Lights (Ctrl Alt L)
            • Simulation»Material (Ctrl Alt M)
            • Simulation»Display (Ctrl Alt D)
            • Simulation»Chip and Split (Ctrl Alt C)
            • Simulation»Compare (Ctrl Alt Q)
            • Simulation»Options (Ctrl Alt O)
              • Time Line Options
              • Tool Path Options
              • MRS Options
              • Tolerance Options
              • Miscellaneous Options
            • Simulation»Open Setup
            • Simulation»Save Setup
          • Tools Menu
          • Window Menu
          • Help Menu
    • Post-Processor Vocabulary
      • The AIR Command [MLPC]
      • The AM Command [MLC]
      • The APPLY Command [MLEPCS]
        • Milling vs. Turning for C Axis Lathes
        • Punching vs. Contouring
        • Composite Machines
      • The ARCSLP Command [MLEPC]
        • 2D Arc Control
        • 3D Arc Control
      • The ASSIST Command [PC]
      • The AUXFUN Command [MLEPC]
      • The BREAK Command [MLEPC]
      • The CALSUB Command [MLEPC]
      • The CHANNL Command [L]
      • The CLAMP Command [MLEPC]
        • Parametric CLAMP Format
        • Axis-Specific CLAMP Format
        • Table Clamping for Punch Presses
        • Linear Positioning with Rotary Axes
      • The CLEARP Command [ML]
      • The CLRSRF Command [ML]
      • The COOLNT Command [MLE]
        • Primary Coolant
        • Coolant Pressure
        • Auxiliary Coolant
      • The COUPLE Command [L]
      • The CUTCOM Command [MLEPC]
        • Length Compensation
        • Diameter Compensation
        • Diameter Compensation Cornering
        • Diameter Compensation Offset
        • Diameter Compensation Filleting
        • 3D Tool Compensation
        • Fixture Compensation
          • Per-Axis Fixture Compensation
          • All-Axes Fixture Compensation
        • Rotary Table Dynamic Fixture Compensation
      • The CYCLE Command [ML]
        • The CYCLE/ON Command
        • The CYCLE/OFF Command
        • The CYCLE/AUTO Command
        • The CYCLE/RETURN Command
        • Common Cycle Parameters
          • Depth of Operation
          • Cutting Feed
          • Clearance Height
        • Common Cycle Options
          • Return Height
          • Additional Rapid Plunge
          • Dwell
        • The DRILL Cycle
        • The FACE Cycle
        • The TAP Cycle
        • The BORE Cycle
        • The BORE-BACK Cycle
        • The REAM Cycle
        • The DRILL-DEEP Cycle
          • Absolute Step Format
          • Incremental Step Format
          • Parameters
        • The TAP-DEEP Cycle
          • Absolute Step Format
          • Incremental Step Format
          • Parameters
        • The DRILL-BRKCHP Cycle
          • Absolute Step Format
          • Incremental Step Format
          • Parameters
        • The TAP-BRKCHP Cycle
          • Absolute Step Format
          • Incremental Step Format
          • Parameters
        • The THRU Cycle
        • The CSINK Cycle
        • The MANUAL Cycle
      • The DEFSUB Command [MLEPC]
        • Subprogram Definition
        • Subprogram Output
        • Index and Copy Behavior
      • The DELAY Command [MLEPC]
      • The DISPLY Command [MLEPC]
      • The END Command [MLEPC]
      • The ENDSUB Command [MLEPC]
      • The FEDRAT Command [MLEPC]
        • Feed Rate Value and Mode
          • General Syntax
          • Wire EDM Syntax
          • Punch Press Syntax
        • Inverse Time Selection
        • Set High Feed Threshold
        • Feed Rate Limiting
        • Feed Rate Coverage Control
        • Feed Scaling
        • Feed Adjustment
      • The GOHOME Command [MLEPC]
      • The HEAD Command [LEC]
        • Merging Lathes
          • The Non-Merge Mode
          • The Merge Mode
        • 4-Axis Wire EDM Machines
          • The Non-Merge Mode
          • The Merge Mode
        • Contouring Heads
      • The HOMEPT Command [MLEPC]
        • Reference Home Position Definition
        • Machine Home Position Definition
        • Reset Home Position
      • The INDPOS Command [ML]
      • The INSERT Command [MLEPC]
      • The LCS Command [MLEPC]
        • Fixed LCS Formats
        • Automatic LCS Formats
        • LCS Activation/Deactivation
      • The LEADER Command [MLEPC]
      • The LIMIT Command [MLEPC]
        • Travel Limit Checking
        • Travel Limit Tool Compensation
        • Travel Limit Fixture Compensation
        • Travel Limit Frame Transformation
        • Preferred Rotary Solution – Modulo-360 Range
        • Preferred Rotary Solution – Physical Range
        • Limit Based Cartesian-Polar Switching
          • Polar Interpolation Switching
          • Polar Emulation Switching
          • Polar Switching Activation
        • Limit Based Singular Positioning
      • The LINTOL Command [ML]
        • Linearization Activation
        • Linearization Tool-Tip Tolerance
        • Linearization Tool Length Adjustment
        • Linearization Angular Tolerance
        • Linearization Stepping Control
        • Singularity Push-Thru
        • Tool-Tip-Only Linearization
        • Linearization with RTCP
        • Linearization Spline Fitting
        • Rotary Turn-Around
        • Linearization Path Planning
        • Forced Path-Planning Scan
        • Singular Pre-Positioning
        • Rotary Winding
      • The LOAD Command [MLEP]
        • Wire EDM machines
        • Punch Press machines
        • Mill and Lathe machines
      • The LOADTL Command [MLEP]
        • Wire EDM machines:
        • Punch Press machines:
        • Mill and Lathe machines:
      • The LOCATE Command [MLEPC]
        • Parametric Format
        • Axis-Specific Format
        • Applying and Removing Last Preset Positioning Offset
      • The LPRINT Command [MLEPCS]
      • The MACHIN Command [MLEPCS]
      • The MCHTOL Command [MLPC]
        • Exact-Stop Machining Tolerance
        • High Speed Machining Tolerance
      • The MODE Command [MLEPCS]
        • Absolute vs. Incremental Positioning
        • Diameter vs. Radius Positioning
        • Polar Interpolation
        • Polar Emulation
        • Rotating Tool Center Point
        • 6-Axis Post-Processing Functions
          • Cancel 6-Axis Processing
          • Shared Linear Axes
          • Tri-Rotary Interpolation
        • Skip Code
        • Arc and Helix Fitting
        • Spline Fitting
        • Turning Curve Fitting Off
        • Pattern Fitting
      • The MOVETO Command [MLEPC]
      • The MSYS Command [MLEPC]
      • The OFSTNO Command [ML]
      • The OPNAME Command [MLEPC]
      • The OPSKIP Command [MLEPC]
      • The OPSTOP Command [MLEPC]
      • The OPTYPE Command [MLEPC]
      • The ORIGIN Command [MLEPC]
      • The PARTNO Command [MLEPC]
      • The PENDWN Command [MLEPC]
      • The PENUP Command [MLEPC]
      • The PITCH Command [L]
      • The PIVOTZ Command [EP]
        • Punch Presses
        • Wire EDM Machines
      • The PLOT Command [MLEPC]
        • PLOT Activation
        • PLOT Transformation
      • The POWER Command [PC]
      • The PPRINT Command [MLEPC]
      • The PREFUN Command [MLEPC]
      • The RAPID Command [MLEPC]
      • The RETRCT Command [ML]
      • The REWIND Command [MLEPC]
      • The ROTABL Command [ML]
        • Position Rotary Axis
        • Unwind Rotary Axis
        • Preferred Singular Rotary Axis
      • The SAFETY Command [MLC]
        • Modal Safety Setting
        • Safe Positioning Motion Squaring
        • Safe Positioning Motion Splitting
        • Safe Positioning Path Selection
      • The SAFPOS Command [MLEPC]
        • Reference Tool/Head Change Position
        • Machine Tool/Head Change Position
        • Reset Tool/Head Change Position
      • The SELCTL Command [MLP]
      • The SELECT Command [MLP]
      • The SEQNO Command [MLEPC]
      • The SHUTTR Command [PC]
      • The SmartPACK Family of Commands
      • Optimize Positioning with SmartPATH™
        • Positioning Clearance
        • Positioning Velocity
        • Reference Home Positioning
      • Optimize Air-Cutting with SmartCUT
        • Air-cut Clearance
        • Air-cut Positioning Velocity
        • Air-cut and SmartPATH
      • Optimize Cutting Feed with SmartFEED
      • The SPINDL Command [MLEP]
        • Wire EDM Machines
        • Punch Presses
        • Mills and Lathes
      • The STOP Command [MLEPC]
      • The SYNCTR Command [L]
      • The THREAD Command [L]
        • Single Pass Thread
        • Multi-Pass Thread
        • Specifying the Thread Depth
        • Specifying the Thread Entry
        • Specifying the Thread Chamfer and Exit
        • Specifying the Thread Size
        • Specifying the Thread Contour
      • The TLNAME Command [ML]
      • The TMARK Command [MLEPC]
      • The TOOLNO Command [ML]
        • Tool Parameters
        • Head Parameters
      • The TORCH Command [PC]
      • The TPRINT Command [MLEPC]
      • The TRANS Command [MLEPC]
        • Parametric TRANS Format
        • Axis-Specific TRANS Format
        • Applying and Removing Last Translation Values
      • The TURRET Command [L]
      • The UNLOAD Command [MLE]
        • Wire EDM machines
        • Mill and Lathe machines
      • The VTLAXS Command [M]
        • Rotary Axis Tolerance
        • Tool Vector Tolerance
      • Other CL File Commands Affecting Output
        • The ISN Command
        • The TRACUT Command
        • The INDEX Command
        • The COPY Command
        • The BLOCK Command
        • The DEFCOPY and COPY Commands
        • The FROM Command
        • The GODLTA Command
        • The GOTO Command
        • The CONT Command
        • The MOVE Command
        • The MOVARC Command
        • The DNTCUT and CUT Commands
        • The TOLER, INTOL and OUTTOL Commands
        • The CUTTER Command
        • The MULTAX Command
        • The UNITS Command
        • The TLAXIS Command
        • The FINI Command
        • The CONTRL Command
          • Aptsource Input Length
          • Setting Internal Epsilon
          • Diagnostic Message Control
          • Circular Interpolation Direction Control
          • Circle Record Type Control
          • Circle Quadrant Segmentation
          • Multi-point Motion Control
          • TRACUT Command Processing
          • INDEX and COPY Command Processing
          • BLOCK, DEFCOPY and COPY Command Processing
          • Nested COPY Matrix Multiplication
        • The INCLUD Command
        • The PPWORD Command
        • The SYN Command
        • The SYNEX Command
    • Diagnostic Messages
      • General Information
      • Modifying Diagnostic Messages
      • Error File
  • Glossary
  • Appendix
    • Character Set
    • Post-Processor Major Words
    • Post-Processor Minor Words
    • Reserved Words
    • Post-Processor Macro Samples
      • Macro Example #1
      • Macro Example #2
      • Macro Example #3
  • Index
Icam Post V27
  • ⧉
  • Icam Post V27 documentation

Icam Post V27 documentation

Table of Contents

  • Copyright
  • Using this manual
  • Icam Post: General Information
    • About Icam Post
    • About Post-Processing
    • About QUEST and GENER
    • About the Icam Portal
  • QUEST: Post-Processor Development
    • QUEST
    • Post-Processor Macros
    • Macro System Variables
    • Macro Functions
  • GENER: The Post-Processor
    • GENER
    • Post-Processor Vocabulary
    • Diagnostic Messages
  • Glossary
  • Appendix
    • Character Set
    • Post-Processor Major Words
    • Post-Processor Minor Words
    • Reserved Words
    • Post-Processor Macro Samples
  • Index
Next

© Copyright 2026, CGTech.